V-ZUG UnimaticDry V2000, Operating Instructions Manual

Page: 32 / 44

9 Trouble-shooting
9.2 Other possible problems
Problem Possible cause Solution
It is not possible to
select a new pro-
gramme after closing
the appliance door. ▪ A programme was in-
terrupted.
▸ Touch the button.
▸ Select a new programme.
The appliance will
not start. ▪ The appliance door
is open. ▸ Close the appliance door.
▪ Interruption in power
supply. ▸ Insert plug into mains socket.
▸ Turn wall switch on.
▸ Check fuse or circuit breaker.
The washing is not
dry enough. ▪ Mixed laundry load. ▸ Select a longer programme.
Or:
▸ Select timed drying.
Or:
▸ Change the level of dryness.
▪ Interruption in power
supply. ▸ Insert plug into mains socket.
▸ Turn wall switch on.
▸ Check the fuse or circuit breaker.
▪ The demo mode is
switched on. ▸ Unplug at the mains and then plug
back in again.
If appears:
▸ Switch the demo mode off (see
page 21).
The programme dur-
ation remains frozen
at 0h01 for a longer
period of time. ▪ The laundry is being
cooled down. ▸ No action is necessary. The laundry
can be unloaded at any time as long
as it is then spread out to cool
down.
▪ A high ambient tem-
perature extends the
cooling-down phase. ▸ No action is necessary. The laundry
can be unloaded at any time as long
as it is then spread out to cool
down.
▪ The temperature
sensor is dirty. ▸ Clean the temperature sensor (see
page 27).
32