![background image](http://html1.mh-extra.com/html/v-zug/unimatic-tsl-wp/unimatic-tsl-wp_operating-instructions-manual_3121392038.webp)
11 Technical data
11.2
Note for testing institutes
▸ The declaration data can be determined correctly only after a run-in phase of 5 com-
plete drying programmes with washing (automatic programme: normal dry
).
▸ Wash the door filter each time after completing a drying programme.
▸ The moisture sensor of the appliance is calibrated based on average water hardness
levels. To adjust the water conductivity value of the appliance according to the norm
(75 mS/cm), the level of dryness must be set to «1» in the user settings.
Set to the standard programme according to EN 61121:
▪
Cotton laundry, normal dry, 7 kg load capacity
▸ Press the
button.
▪
Cotton laundry, iron dry, 7 kg load capacity
▸ Press the
button.
▪
Easy-care fabric, normal dry, 2.5 kg load capacity
▸ Press the
button and then the
button.
11.3
Consumption values
The stated values for the programme duration and energy apply for the maximum stated
capacity with a wash spun at around 1200 rpm (corresponds to a residual moisture of
around 60%). A higher spinning speed or a smaller load reduce them by around 20–30
%.
Automatic programmes
Programme
Load capa-
city
kg
Residual moisture
%
Programme duration
hrs./mins.
Energy
kWh
Extra dry
1–7
–4 to –1
1h55
2.00
Normal dry*
1–7
–1 to 2
1h29
1.70
Iron dry
1–7
8 to 16
1h15
1.40
Damp
1–7
20 to 30
1h05
1.05
Woollens
1
0 to 5
1h35
1.70
*
Standard cotton programme, the most efficient in terms of energy consumption for
drying wet cotton laundry
38