![background image](http://html1.mh-extra.com/html/v-zug/unimatic-tsl-wp/unimatic-tsl-wp_operating-instructions-manual_3121392033.webp)
8 Trouble-shooting
... «Final Airing» appears in the display
Possible cause
Solution
▪
The laundry is being cooled
down.
▪
A high ambient temperature
extends the cooling-down
phase.
▸ No action is necessary. The laundry can be un-
loaded at any time as long as it is then spread out
to cool down.
▪
The temperature sensor is
dirty.
▸ Clean the temperature sensor.
... it is not possible to select a new programme after closing the appliance door
Possible cause
Solution
▪
A programme was interrupted. Press the
button.
Select a new programme.
... the appliance does not start
Possible cause
Solution
▪
The appliance door is open.
▸ Close the appliance door.
▪
Interruption in power supply.
▸ Insert the plug into the mains socket.
▸ Turn the wall switch on.
▸ Check the fuse or circuit breaker.
... the washing is not dry enough
Possible cause
Solution
▪
Load contained mixed fabrics. ▸ Select a longer programme.
▸ Select the
programme.
▸ Change the level of dryness.
▪
Interruption in power supply.
▸ Insert the plug into the mains socket.
▸ Turn the wall switch on.
▸ Check the fuse or circuit breaker.
▪
The demo (dEno) mode is
turned on.
▸ Unplug at the mains and then plug back in again.
If
Demo mode
ON
appears, clear
the demo mode by opening the appliance door
and pressing the
,
and
combination of
buttons.
33