5
Operating the appliance
5.1
Electronic ignition
All hobs have electronic ignition.
▸ Press down the control knob for the required burner and turn it anti-clock-
wise to the ignition position.
▸ Press the control knob.
–
The flame ignites.
▸ Hold the control knob down for about 2 seconds so that the flame can be
detected.
–
While the control knob is still pressed down, sparks are produced on all
burners to ignite the gas.
▸ Turn the control knob to the desired position and release.
▸ If the flame has not ignited, turn the control knob to «Off» and repeat the
steps. This time, press and hold the control knob for longer (up to 10
seconds).
Ignition by hand in the event of a power failure:
▸ Press down the control knob for the required burner in the ignition position.
▸ Use a flame (cigarette lighter, match, etc.) to ignite the burner.
Risk of deflagration: Ventilate the room well!
If the flame does not ignite after 15 seconds, switch off the burner and
open a door or window. Wait for at least a minute before trying again.
5.2
Switching a burner off
▸ Turn the control knob for the burner in a clockwise direction as far as the
position.
16
Summary of Contents for GAS641GKAZ
Page 1: ...Operating instructions With dial controls GAS641 Gas hob ...
Page 24: ...24 11 Notes ...
Page 25: ...25 ...
Page 26: ...26 ...