Installation instructions
Built-in variants of gas hob
Multi-Sliders GAS411/421
1037456-05
26/07/2023
1037456-05
3
Surface-mounted installation
The layout of the hob to be fitted may differ from the hob illustrated!
H
Y – Y
B
Drawer/
cabinet
Side panel
S*
≥81
T
≥90
373±1
GAS411GSBZ
GAS421GSBZ
600
≥400
≥50
≥50
490±1
60
0
Ra
H
384
501
Y
Y
Ri
600
≥40
0
≥50
≥50
490±1
60
0
Ra
373±1
H
384
501
Ri
Y
Y
* The required clearance must be observed!
Model number
B
H
Corner radius Ra/Ri
GAS411GSBZ, GAS421GSBZ
≥95 mm
84 mm
0–5/2 mm
B
Required clearance for service replacement over the entire cut-out area.
H
Dimension from the top of the work surface to the underside of the gas connection
Ri
Corner radii of appliance for base plate
Ra
Outer corner radii of cut-out
S
Minimum distance between the top of the work surfaces and any drawer
T
Minimum distance between the cut-out in the back and any drawer
Installation
Do not damage the sealing bead.
The sealing bead must lie all around the edge of worktop.
▸
Create an accurate installation cut-out.
▸
Carefully put the appliance in the installation cut-out and press against the worktop with sufficient overlap.
▸
Fit the four adjusting braces along the circumference of the appliance to the bore holes provided and tension the appliance against
the worktop.
Combination installation
The intermediate support 1014361 or 1019199 is required for surface-mounted combination installation.
