V-ZUG DSMS, Operating Instructions Manual, Page: 10 / 24

3 Operating the appliance
3 Operating the appliance
3.1 Using for the first time
Appliance configuration
The model can be used to extract or recirculate air. The appliance is set up ex-factory for
use in the extraction mode.
If the appliance is to be operated as an extraction model, the saturation indicator
for the activated charcoal filters must be deactivated.
Activating the saturation indicator for the activated charcoal filters
▸ Switch the appliance off.
▸ Depress the
button for 2 seconds.
–
C
flashes twice in the display.
▸ The appliance is now configured for the recirculation mode and the saturation indic-
ator for the activated charcoal filters is activated.
Deactivating the saturation indicator for the activated charcoal filters
▸ Switch the appliance off.
▸ Depress the
button for 2 seconds.
–
C
flashes once in the display.
▸ The appliance is now configured for the extraction mode and the saturation indicator
for the activated charcoal filters is deactivated.
3.2 Optimizing the suction performance
Using suitable pan lids and tilting them slightly intensifies the suction performance
of the downdraft hood.
▸ Slightly tilt the pan lid so that the steam
and odours given off during cooking can
be extracted more efficiently into the
downdraft hood. Use a wooden spoon
to keep the pan lid in position.
– This improves and intensifies the suc-
tion performance.
3.3 Switching the appliance on
Do not switch the appliance on until the
fan flap is open.
▸ Open the fan flap 1 manually.
▸ Press the button to switch the appli-
ance on.
– The appliance switches on at power
level 1.
1
10