V-ZUG DFPQSL Series, Operating Instructions Manual

Page: 12 / 32

4 Operating the appliance
4.1 Using for the first time
Configuring the appliance
The appliance can be used in the extraction or recirculation mode. The appli-
ance is set up as a recirculation hood with 5 kg of activated charcoal ex-fact-
ory. With this setting, the service life of the activated charcoal filter is 1,200 op-
erating hours. The operating hours counter must be configured for the version
of the range hood with 2.5 kg of activated charcoal. The saturation indicator
can also be adjusted to your cooking habits.
If the appliance is to be used as an extraction model, the saturation in-
dicator for the activated charcoal filter must be deactivated.
Amount of activated charcoal used
▸ Remove the grease filters and combi
filters (see Cleaning the grease filter
and combi filter (see page 18)).
– For the length of the motor hous-
ing, see on the inside (see arrow).
Short motor housing = 2.5 kg activated charcoal
Long motor housing = 5 kg activated charcoal
Activating and changing the saturation indicator for the activated charcoal
filter
▸ Switch the appliance off.
▸ Depress the button for 3 seconds.
– The and displays flash.
▸ Press the button repeatedly until the desired setting illuminates in the dis-
play.
– The setting selected will be automatically accepted after 5 seconds.
The range hood is now set up as a recirculation model.
12