V-ZUG DFPQ, Operating Instructions Manual

Page: 15 / 32

4 Operating the appliance
4.2 Operation
Switching the appliance on
▸ Pull out the glass deflector plate.
The appliance is most effective when the glass deflector plate is fully
pulled out.
▸ Press the button.
– The appliance switches on at power level 1.
▸ Press the button repeatedly until the desired power level is reached.
– The current power level illuminates in the corresponding display.
– The display flashes when the intensive level is selected.
Alternatively, the next higher power level can be set using the glass deflector
plate:
▸ With the appliance switched on, push the glass deflector plate completely in
and then pull out again within 2 seconds.
– The next higher power level is selected.
This procedure can be repeated up to the intensive level. If this is repeated
again the appliance switches back to power level 1.
We recommend switching the appliance on at power level 1 some 5
minutes before cooking. Use a low power level for normal cooking
smells and a higher power level for very strong cooking fumes and
smells.
The appliance has a memory function: the next time the appliance is
used, if the glass deflector plate is pulled out then the appliance
switches on at the power level last used.
Switching the appliance off
▸ Press the button or push the glass deflector plate in.
After finishing cooking, allow the appliance to run for another 15
minutes so that the cooking fumes and smells can be extracted.
15