background image

4 Care and maintenance

3.4 

Switching appliance off

▸ With the appliance running, re-

peatedly press the 

 button or push

the deflector plate completely in.

The appliance switches off.

If the deflector plate is pulled completely out again, the extractor fan comes on at
the level previously set.

Care and maintenance

4.1 

Cleaning the housing

Make sure no water gets inside the appliance. If water gets into the appliance, it
can cause damage.

Do not use abrasive cleaners, scouring pads, steel wool, etc. for cleaning, as they
can damage the surface. Before cleaning the appliance, disconnect the power
supply and switch off the fuse or circuit breaker.

Exterior

▸ Clean using a clean, damp cloth and a mild cleaning agent, then wipe dry.

Interior

Grease and condensate water can build up on the inside around the metal grease filters.
▸ Clean using a clean, damp cloth and a mild cleaning agent, or a soft brush as

needed, then dry well using kitchen towel.

4.2 

Metal grease filters

The metal grease filters must be cleaned at least once a month with normal use. If prop-
erly cared for, the grease filters should provide years of service.

Removing

Using both hands, carefully remove the metal grease filters, making sure not to
drop or damage them.

10

Summary of Contents for DFL5





















Reviews: