manualshive.com logo in svg

V-ZUG DF-SLG6, Operating Instructions Manual, Page: 13 / 32

Share
Download
V-ZUG DF-SLG6 Operating Instructions Manual Download Page 13

…  Use

13

Switching the automatic running-on function on/off

A

To switch on the automatic running-on function during operation, press the 

 button.

– The running-on time is activated. This is indicated and confirmed by the 

lighting up of the last selected power level and the readiness indicator.

The runnning-on times are individually specified for the respective power 
level.

䡲

Power level 1 = 20 minutes

䡲

Power level 2 = 15 minutes

䡲

Power level 3 = 10 minutes

䡲

Power level P =   5 minutes

– After the specified time, the fans automatically switch off.

A

To switch off the automatic running-on function, press the 

 button 

again.

– The readiness indicator stops flashing. Operation continues at the set 

power level.

 

Switching the illumination on/off

A

To switch on, press the 

 button.

A

To switch off, press the 

 button again.

The illumination can always be switched on or off. It is independent of the 
operating mode or the position of the glass shield.
 

Summary of Contents for DF-SLG6

































Reviews:

No comments