V-ZUG DF-SLG5, Operating Instructions Manual

Page: 16 / 32

… Use
16
Switching off the appliance
A Fully insert the glass shield 1 .
– This switches off the extraction fan
and the illumination (stand-by mode).
– The settings remain saved
(exception: level P).
If the glass shield is pulled out slightly, the extractor fan switches to the set
power level or the illumination switches on, providing it was switched on when
the glass shield was fully inserted.
Inserting/pulling out the glass shield
A Fully insert the glass shield 1 .
– The extractor fan automatically switches off.
– The settings (power level and light) used during the last period of
operation remain saved. These are reactivated once the glass shield is
reopened. An exception is the power level «P».
A
Pull out the glass shield 1 partially or completely.
– In this position, the stove top lighting and the various power levels can
be switched on and off at will.
– The last used settings (power level and light) are reactivated. An
exception is the power level «P». This setting is deleted and the
ventilation must be reset.
– If the stove top lighting was previously switched on in the closed
position, the light remains uninterruptedly activated in the opened
position as well.
In this position, only the stove top lighting can be switched on and off.
1