Fig. 34
u
For unit walls which are 16 mm thick: Clip a spacer on
all hinges. No spacer is required if unit walls are 19 mm
thick.
Fig. 35
u
Use a screwdriver to loosen the cover at the top left and
remove it.
Fig. 36
u
Loosely screw on the mounting bracket. The bracket
should still be able to move slightly.
Fig. 37
Fig. 38
u
Insert the appliance all the way into the unit recess. The
adjustable feet must rest in the recesses in the brackets
on both sides.
Fig. 39
u
Remove the floor mounting bracket stopper. Loosen the
stopper by moving it and, if necessary, pull it off using
pliers.
Fig. 40
u
Check that the appliance is flush in the cabinet recess.
The mounting bracket must be attached to the side wall
of the cabinet recess.
Fig. 41
Installing the appliance in the recess
58
* Depending on model and options
