V-ZUG CookTop Wok I40, Operating Instructions Manual

Page: 9 / 24

4 Operating the appliance
▪ If the original wok pan is not used for the next 10 minutes while pan detection is run-
ning,
– the cooking zone switches off.
– the display changes from to .
– the appliance switches off after 10 seconds.
3.5 Original wok pan
Only use the original wok pan supplied. Other pans can cause malfunction of or
damage to the appliance.
The original wok pan was especially designed for this appliance. It is made of a special
material with particular inductive heat transfer properties. As a result, the original wok
pan and the food being prepared in it cannot overheat, providing additional safety both
in terms of operating the appliance and fire prevention.
▸ Before use, ensure the outside of the original wok pan is clean and dry.
▸ Place the original wok pan carefully in the wok bowl.
▸ Always lift the original wok pan out of the wok bowl – do not slide it out over the edge
of the wok bowl.
The original wok pan is unable to stand securely on flat surfaces because of its curved
base.
▸ To serve, leave the original wok pan in the wok bowl and place the prepared food dir-
ectly on the plate.
Noise during cooking
Cookware can make noise during cooking. This does not indicate any malfunction, nor
does it affect the functioning of the appliance in any way.
4 Operating the appliance
4.1 Switching the appliance on and off
▸ To switch the appliance on: Depress the button for 1 second.
– flashes in all the power level displays.
– If no other entry is made, the appliance switches off again after about 10 seconds
for safety reasons.
▸ To switch the appliance off: Touch the button.
4.2 Selecting a cooking zone
▸ Press or swipe the slider to set the power level.
4.3 Switching a cooking zone off
▸ Touch on the slider.
– If no other entry is made, the appliance switches off after 10 seconds.
4.4 Residual heat indicator
After a cooking zone is switched off, remains illuminated as long as there is a risk of
burns.
9