V-ZUG CookTop Wok I40, Operating Instructions Manual

Page: 14 / 24

5 User settings
4.15 Wipe protection
This function prevents the power level from being changed accidentally, for instance
when wiping the control panel with a cloth.
▸ Touch the
button.
– The indicator light for the button illuminates.
▸ Wipe protection is switched off by touching the button again or automatically after
30 seconds.
Touch the button to switch the appliance off at any time.
5 User settings
The following user settings can be set and saved individually:
User setting Setting value Factory
setting
P0 Acoustic signal
loudness
0 Low 2
1 Medium
2 High
P1 Acoustic signal at end
of operating time / timer
0 No acoustic signal 2
1 Automatically off after 10 seconds
2 Automatically off after 1 minute
P2 Operating time
PowerPlus
0 Ends after 5 minutes 1
1 Ends after 10 minutes
2 Ends after 15 minutes
P4 Default operating time /
timer duration
0 Default time 0 minutes 3
1–9 Adjustable in steps from 10–90 minutes
P5*
Acoustic signal when
buttons are pressed
0 Acoustic signal off 1
1 Acoustic signal on
P6 Restore factory settings 0 To restore factory settings: Hold the
button depressed for 2 seconds.
* When the operating time or timer is up or when error messages appear, an acoustic
signal is emitted at the level of loudness set in «P0».
5.1 Changing user settings
▸ With the appliance switched off, simultaneously hold the and buttons de-
pressed for 2 seconds.
– An acoustic signal is emitted.
▸ Touch both sliders to the left of display 3 .
– An acoustic signal is emitted.
– The indexed user setting, e.g. , appears in display 3 .
– The current user setting value is shown in display 2 .
14