5 OptiLink
5
OptiLink
5.1
Connecting the hob to the range hood
The hob can only be connected to a range hood with the OptiLink function.
To activate the connecting mode on the hob:
▸ Switch the hob off.
▸ Access the user setting (see page 20).
▸ Select the
user setting.
▸ Select the setting by touching or swiping slider 1; no further action is to be taken.
–
and the setting illuminate in the displays.
To activate the connecting mode on the range hood:
–
Make the settings as described in the operating instructions for the range hood.
If a connection between the hob and the range hood was successfully established, it
must be confirmed on the hob as follows:
▸ Hold the button depressed for 2 seconds.
–
The setting is saved and the user settings are closed.
–
The appliances are connected and OptiLink is active.
5.2
Deactivating OptiLink
Terminating the connection between the range hood and the hob:
▸ Access the user setting (see page 20).
▸ Select the
user setting.
▸ Touch or swipe slider 1 to select the setting.
▸ Hold the button depressed for 2 seconds.
–
The setting is saved and the user settings are closed.
–
OptiLink is deactivated.
See the operating instructions for the range hood for terminating OptiLink.
6
User settings
The following user settings can be set and saved individually:
User setting
Setting value
Factory
setting
Acoustic signal loudness
Low
Medium
High
Acoustic signal at end of
operating time / timer
No acoustic signal
Automatically off after 10 seconds
Automatically off after 1 minute
Operating time
PowerPlus
Ends after 5 minutes
Ends after 10 minutes
Ends after 15 minutes
19
Summary of Contents for CookTop V4000 I704
Page 1: ...Operating instructions CookTop V4000 I604 I704 Induction hob ...
Page 29: ...29 12 Notes ...
Page 30: ...30 ...
