5 Applications
Cut of meat
Degree of
doneness
Recommended target
temperature °C
Neck of pork
well done
76
Shoulder of pork
well done
76
Leg of lamb
medium
65
well done
74
Soft roasting seared
▸ Season or marinate the meat.
Remove any marinade made with herbs, mustard, etc. from the meat before sear-
ing. These constituents easily burn.
▸ Salt the meat immediately before searing.
▸ Briefly sear the meat on all sides for no longer than 5 minutes.
▸ Then place the meat on the wire shelf.
The meat can also be browned after cooking. This has little effect on the degree of
doneness of large cuts of meat. For small cuts of meat, the target temperature
should be reduced by 2–3 °C.
▸ Insert the food probe into the meat so that the tip is in the centre of the thickest part.
For a correct food probe temperature reading, the food probe must as far as pos-
sible be fully inserted into the centre of the food. The temperature inside the meat
is crucial for optimal results at the end of cooking.
▸ Put the wire shelf with the meat at level 2 and a baking tray, which has been lined with
aluminium foil, at level 1.
▸ Insert the food probe plug into the socket.
▸ Start
«Soft roasting seared».
Selecting and starting soft roasting
Once the programme has started it is no longer possible to change the target tem-
perature.
▸ Long touch the display.
–
The start screen appears.
▸ Select the
«Soft roasting» application group and confirm with «OK», if required (see
▸ Select the desired type of meat.
▸ Select the desired cut of meat.
▸ Select the desired soft roasting method and confirm with «OK».
▸
If the desired type of meat or cut is not available for selection, select «Freely se-
lect meat type».
▸ Select the degree of doneness (not possible for «Freely select meat type»).
–
The settings for the application appear in the display.
▸ Adjust the recommended value, if necessary, and set a delayed start if desired (see
▸ Press «Start» to start soft roasting.
37
