2
Using for the first time
Before operating the newly installed appliance for the first time, the following steps
should be taken:
▸ Remove packaging and transport materials as well as any protective blue film from
out of the cooking space.
▸ Clean the cooking space and the accessories.
▸ Long touch the display.
–
The appliance starts.
–
Various user settings necessary for operation such as language, date, time, time
format, summer/winter time adjustment, time synchronization, water hardness, tem-
perature unit, V-ZUG-Home mode and colour scheme appear in the display one
after the other.
▸ Make the settings and confirm.
▸ Fill the water tank up to the «max.» mark with fresh, cold drinking water and slot into
position in the water tank compartment.
▸ Start the rinsing of the water system.
▸ Remove all the accessories out of the cooking space before carrying out the initial
burn-in.
▸ Start the initial burn-in.
If the initial burn-in step is skipped, it must be carried out manually after completing the
initial set-up.
▸ Heat the empty cooking space (without wire shelves, baking trays, etc.) using the
operating mode at 100 °C for about 30 minutes.
As there is likely to be some smoke and odour given off, we recommend ventilat-
ing the room well during this phase.
All temperatures in these operating instructions are given in degrees Celsius (°C).
3
Appliance description
3.1
Construction
1
3
4
2
1
Operating and display elements
2
Ventilation opening
3
Door handle
4
Appliance door
9
Summary of Contents for CombiSteamer V4000 45
Page 1: ...Operating instructions Steamer V4000 Steamer...
Page 50: ...50 14 Notes...
