background image

6 GourmetGuide

The food probe must be inserted as far into the middle of the meat as possible to
get a correct reading of the food probe temperature. The temperature inside the
meat is crucial for optimal results at the end of cooking.

▸ Put the wire shelf at level 2 and place the dish on it.
▸ Insert the food probe plug into the socket.
▸ Start 

 «Soft roasting seared» (see page 31).

«Soft roasting with grill»

▸ Season or marinate the meat.

Roll and tie up less compact cuts of meat such as a boneless leg of lamb so that
the roast browns evenly under the grill.
Remove any marinade made with herbs, mustard, etc. from the meat before 
«Soft roasting with grill». These ingredients burn easily.

▸ Put the meat on a rotisserie spit and insert (see page 20) the food probe or put (see

page 21) the meat and food probe in a roasting basket.

▸ Put the baking tray, which has been lined with aluminium foil, at level 1.
▸ Place the rotisserie spit or roasting basket in the frame and push it right to the back of

the cooking space at level 3.

▸ Secure the food probe to the frame and plug into the socket.
▸ Start 

 «Soft roasting with grill» (see page 31).

Selecting and starting soft roasting

The longer the meat is cooked, the more tender and succulent it becomes. This
applies particularly for thicker pieces of meat.
The target temperature cannot be changed once soft roasting has started.

▸ If the appliance is switched off, first press the adjusting knob.
▸ Press the   touch button.

▸ Select  .
▸ Select the desired soft roasting method.
▸ Select the desired type of meat.
▸ Select the desired cut.

If the desired type of meat or cut cannot be selected, select the 

 «Freely se-

lect meat type» option.

▸ For soft roasting seared: Select the degree of doneness (not possible for 

 «Freely

select meat type»).

▸ For soft roasting with grill: Select the desired degree of browning.

The operating mode settings are displayed.

A recommended value appears above the target temperature.

▸ Adjust the recommended value if necessary and set a delayed start if you wish.
▸ To start soft roasting, select  .

The food probe must be plugged in.

Soft roasting starts.

The set target temperature, the current food probe temperature and the remaining
time are displayed.

The remaining time appears in the digital display.

31

Summary of Contents for BCSLPZ60

























































Reviews: