V-ZUG BCSLPZ60 Operating Instructions Manual Download

Page: 22 / 56

5 Using the appliance

▸ Insert the end

of the roasting basket into rotisserie drive opening

▸ Place the roasting basket diagonally across the frame, positioning it between the

guides so that positioning groove

sits on the frame

5.7

Cancelling/ending the operating mode before time

▸ In the operating mode settings, select or press the touch button.

–

An acoustic signal is emitted.

–

The selected operating mode is cancelled.

–

The following appears in the display: «

Residual heat» and, for example: «

Hot

air cancelled».

–

If the food probe is plugged in, the food probe temperature is displayed. *

* Depending on the software version

▸ If you wish to start a new operating mode, press the

touch button.

▸ If you wish to switch off the appliance, press the touch button.

5.8

Changing the operating mode

If no operating mode is running:
▸ Select in the settings of the current operating mode.

–

The operating modes menu is displayed.

If an operating mode is already running:
▸ Select or press the touch button.

–

The set operating mode is cancelled.

▸ Press the

touch button and select a new operating mode.

5.9

Timer

The timer functions like an egg timer. It can be used at any time and independently of all
other functions.

Setting and starting the timer

▸ Press the touch button.

–

A suggested value of «10min» appears in the display.

▸ Turn the adjusting knob and set the desired duration.

–

The duration and the end time for the timer appear in the display.

The timer can be set for:

▪

up to 10 minutes in 10-second intervals, e.g. = 9 minutes and 50 seconds;

▪

over 10 minutes in 1-minute intervals, e.g. = 1 hour and 12 minutes;

▪

over 10 hours in 1-hour intervals, e.g. = 18 hours.

The maximum timer duration is 99 hours.
▸ Press the adjusting knob to confirm.

–

The timer starts.

–

If there is no operating mode running with a set duration, the remaining time on the
timer will be displayed in the digital display.

–

The touch button is illuminated in white.

–

If the appliance was in another menu before the timer was set, e.g. operating
modes: the menu or the submenu selected within it, e.g. a running operating mode,
appears.

–

If the appliance was not in another menu: the display goes black.

Summary of Contents for BCSLPZ60

























































Search results

Summary of Contents for BCSLPZ60

Reviews:

Related manuals for BCSLPZ60

Brands by name

Popular brands

V-ZUG BCSLPZ60, Operating Instructions Manual

Search results

Summary of Contents for BCSLPZ60

Reviews:

Related manuals for BCSLPZ60

Brands by name

Popular brands