background image

4 Care and maintenance

Care and maintenance

4.1 

Cleaning the housing

Take care that no water gets into the housing of the appliance! If water gets into
the housing, it can cause damage. Do not use abrasive cleaners, scouring pads,
steel wool, etc. for cleaning, as they can damage the surface. Remove the screw
fuse or switch off the circuit breaker. Cleaning the outside/inside

▸ To deactivate the stand-by mode: Depress the 

 button for three seconds.

The appliance is switched off and the LED goes out.

▸ Clean the outside using a slightly damp cloth – and detergent if necessary – and wipe

dry.

Grease and condensate water can build up on the inside next to the grease filters.
▸ Clean using a slightly damp cloth – and detergent if necessary – and wipe dry.

4.2 

Metal grease filter

The filters can be cleaned.

Removing

▸ Swing the glass panel 

1

 up.

▸ Press down the grip 

2

, swing the grease

filter 

3

 forwards and lift it out of the

bracket 

4

.

1

2
3

4

Take care not to damage the filter.

Cleaning

The grease filters must be cleaned at least once a month with normal use or whenever
the   indicator light flashes. If properly cared for, the service life of the grease filters
should be as long as the service life of the hood.
▸ Clean the grease filters (grip facing downwards) in the dishwasher.
▸ Select an «intensive» – or «heavy soiling» – wash programme with a warm pre-wash.

Cleaning may cause the grease filters to become discoloured. This will not affect
the functioning of the filters in any way.

10

Summary of Contents for AiroClearWall V2000 V90





















Reviews: