background image

11 

Service & Support

The «Trouble-shooting» section gives you valuable tips on how to deal with minor
malfunctions yourself, saving you the time and trouble of calling out a service tech-
nician and any cost that goes along with it.

Information on the V-ZUG warranty can be found at 

www.vzug.com

 →Service

→Warranty information. Please read this information carefully.
Please register your V-ZUG appliance straightaway:

online at 

www.vzug.com

 →Service →Online warranty registration or

using the enclosed registration card.

This will allow you to take advantage of the best possible support in the event of a fault
in the appliance during the guarantee period. You will require the serial number (SN) and
appliance designation to register your appliance. You will find them on the identification
plate of your appliance.
My appliance information:

SN:

 __________________________

Appliance

: _______________________________

Please have this appliance information to hand when contacting V-ZUG. Thank you.

▸ Remove the metal grease filters.

The identification plate is located on the inside of the appliance.

A second identification plate is included in the scope of delivery and should be re-
tained for the purpose of appliance identification.

Your repair order

Call the free service number 0800 850 850 to contact your nearest
V-ZUG service centre. You can arrange an on-site visit by us by phone if you wish.

General queries, accessories and service agreement

V-ZUG will be happy to help you with any general administrative or technical queries, to
accept your orders for accessories and spare parts and to inform you about our pro-
gressive service agreements. You can contact us by calling tel. +41 58 767 67 67 or by
going to our website at www.vzug.com.

23

Summary of Contents for AiroClearCabinet V400

























Reviews: