background image

3 Operating the appliance

3.4 

Intensive level

▸ Touch the 

 button repeatedly until   (intensive level 3) flashes in the display. 

▸ The appliance switches back to level 2 after 5 minutes.
▸ Touch the 

 button to stop the intensive level before the 5 minutes has elapsed.

3.5 

After-running time

▸ Switch the appliance on.
▸ Select the desired power level.
▸ Touching the 

 button activates the after-running time.

While the after-running time is activated, the 

 display flashes according to the

table below and then switches off automatically.

Level

After-running time

1

20 minutes

2

15 minutes

3

10 minutes

Intensive

5 minutes

3.6 

Illumination

▸ Press the 

 button to switch the illumination on. 

▸ Press the 

 button repeatedly to switch the illumination off.

The illumination does not switch off automatically when the deflector plate is
pushed in.

3.7 

Switching the appliance off

▸ Push the deflector plate completely

in.

The extractor fan is switched off.

The settings are saved.

If the deflector plate is pulled slightly out again, the extractor fan comes on at the
level previously set.

10

Summary of Contents for AiroClearCabinet V400

























Reviews: