V-ZUG AdoraDish V4000 Operating Instructions Manual Download Page 52

11 Care and maintenance

▸ Touch 

 to activate.

▸ Confirm.

NO

YES

Do you want to deactivate demo mode?

▸ Display symbol bottom right is re-

moved.



Do not make any other changes to the service settings as otherwise this can affect
the appliance and display functions.

11 

Care and maintenance

11.1 

Cleaning the interior and exterior

With frequent use of programmes with low temperatures (under 55 °C) such as
the Eco programme make sure to run the Machine care programme every now
and again.

Cleaning the interior

Using the correct dosage of detergent will automatically clean the interior of the appli-
ance.
A message indicating it is time to run the Machine care programme appears periodically:

Please start programme      as soon as possible
Empty appliance, add dishwasher cleaner

▸ The message can be cancelled with  . After cancelling it three times, the message

will appear again periodically.

Running the Machine care programme

▸ Cancel the message with  .
▸ Empty the appliance (so that there are no dishes in the baskets).
▸ Clean the filter system.
▸ Add standard dishwasher cleaner as per the instructions on the packaging.
▸ Run the Machine care 

 programme.

Use a standard dishwasher cleaner on a regular basis to ensure perfect results
and a long appliance life.

52

Summary of Contents for AdoraDish V4000









































































Reviews: