Built-in hood
Replacing the activated charcoal filter
Removing the activated charcoal filter
Disconnect hood from mains power supply.
Cover over the hob to protect it from getting damaged.
Remove and clean the grease filters.
If appropriate, remove the flue casing in accordance with the manufacturer’s instructions.
Press the metal cover upwards and at the same time press both filter holders outwards.
– The metal cover comes free, but cannot be completely removed.
Loosen the screws in the front cover and remove the cover.
Installation instructions
J61001.051-1
Installing activated charcoal filters
06.12.13
Built-in, wall and island hood
2
