Installation instructions
«Front loader» washing machine
One-family household
1064372-11
19/10/2022
1064372-11
1
Validity
These installation instructions apply to the models:
11021, 11023, 11025, 11041, 11042, 11043
Warnings
The appliance should be installed by qualified personnel only.
Each step must be carried out and checked in full in the order specified.
If the weight of the appliance is greater than your lifting capacity, the appliance must be transported by several
people or using a transport aid. The weight of the appliance is given on the appliance packaging and in the operating
instructions.
Transport the appliance in an upright position only! Transporting it in any other position will cause damage. When
carried carefully without being shaken, the appliance may be tilted a maximum of 90° to the right (viewed from the
front).
Applicable only to models 11025 and 11043:
In the event that the appliance is tilted during transportation or installation it must not be put into operation for 2
hours.
Identification plate / Accessories / Dimensions
Identification plate
▸
Open the drain tray below the appliance door (see page 2).
–
The identification plate
1
is located below the emergency door
release tool.
1
Installation accessories supplied
The necessary installation accessories are located in the washing drum and in the appliance packaging.
Designation
Article no.
Number
See installation step
Installation set, incl.:
▪
Rubber stopper
▪
Screw material (3 each of
screws, washers, rawlplugs)
▪
Drain hose
▪
Wire hose clamp
▪
Hose support
W41152
1
2
Removing the transport lock (see page 3)
1
Fastening down the installation plate (see page 4)
1
1
1
Installation plate (incl. double-
sided adhesive tape)
W40653
1
Fastening down the installation plate (see page 4)
