Installation instructions
«Front loader» washing machine
One-family household
1064372-11
19/10/2022
1064372-11
4
Fastening down the installation plate
Use the installation plate supplied to install the appliance. It fixes the appliance in position, and is for use with both
free-standing appliances and appliances positioned in a niche.
The use of an unsuitable installation plate or a soft, sound-insulating underlay can affect the proper functioning of the appli-
ance.
In case of underfloor heating, do not drill holes in the floor! Adhere installation plate into place!
Positioning the installation plate
▸
Tip the appliance forwards. Pull out the installation plate
1
from under
the appliance.
▸
Fold out spacers
2
.
▸
Observe the distance to the back and side walls – this applies to indi-
vidual appliances as well as to a tumble dryer and washing machine
positioned next to each other.
▸
The installation plates for the tumble dryer and the washing machine
are the same.
▸
Dimensions 45 and 555 only apply if no plumbing fittings are to be in-
stalled behind the appliance.
1
45
5
595
510
5
555
2
Without underfloor heating
▸
Fasten installation plate
1
to the floor with 3 screws.
▸
Dampen mounting slots
3
with water to make the appliance easier to
push in.
ø5
3
1
With underfloor heating
▸
Take out the double-sided adhesive tape
4
and adhere to the floor.
▸
Adhere the installation plate
1
to the floor.
Do not drill holes in the
floor!
▸
Dampen mounting slots
3
with water to make the appliance easier to
push in.
3
4
1
