8 Care and maintenance
8.3
Cleaning the water inlet filter
To avoid blockages, the filter
1
in the water inlet must be peri-
odically checked and, if necessary, cleaned.
1
The water inlet should be tested for leaks following maintenance work.
8.4
Emergency draining
The water in the appliance may be hot. Scalding hazard! Allow to cool down before
emergency draining.
In the event of a blocked water outlet or drain pump, a malfunction or a power failure, if
there is water still in the appliance it must be drained off as follows:
▸ Open the drain tray
1
and fold right down. The drain tray
1
also functions as a recept-
acle for collecting the water being drained off.
▸ Release the foreign body trap
2
slightly by slowly turning it
anti-clockwise. Steadily drain off the water.
From time to time the drain tray may have to be emptied.
▸ Close the foreign body trap by turning it clockwise and remove
the drain tray from the front.
▸ Empty the drain tray and then put it back in position (push it
straight in until it clicks into position).
2
1
1
When draining off the water, the drain tray can be removed and a larger receptacle
used in its place. The appliance can hold up to 30 litres of water.
26