66
D292469I
Teach Mode
When the system is in
Teach Mode,
TEACH RUN
will appear on the LCD
and the system settings (positions, delay times etc.) are enabled to be
changed.
NOTE:
When the SINGLE STEP key is pressed the system is
automatically put into the teach mode. While in the Single Step Mode pressing
the TEACH key will toggle the teach mode disabling the edit function.
Teach Mode
is designed to allow the Operator to make adjustments to the machine
settings during operation. Any change made while in
Teach Mode
it will be a global
change.
When adjusting the
Place Position
in
Teach Mode
, move the whole box and do
not
affect the Pitch values like when you are in
Calibrate Trays
.
Summary of Contents for Royce DE35-ST
