In case of any query/issue with the product please reach out to us at [email protected]
INSTALLATION INSTRUCTIONS
1. Switch off the power before installing the lamp.
2. To drill the appropriate holes on the cement floor. (Picture 1)
3. Do the wateproof measure for the wire junction and then Connect the electricity
AC:100-240V. (Picture 2)
4. Fix the lamp on the floor by screw. (Picture 3)
5. Cover the nut cap and switch on the power if above steps are done properly
without any mistakes. (Picture 4)
Do the waterproof measures for
the wire junction.
Cover the nut cap.
Fix the lamp on the floor by
screw.
