V-TAC VT-6056-4, Instruction Manual, Page: 2 / 18

• The location you choose should have a minimum clearance of 20 inches from any wall to the
blade tip at any point in its rotation and a minimum of 7 feet from blade level to floor and 10
inches from the blades.
• This ceiling fan was not designed for installation in any location where it might be exposed to
moisture or high humidity. Installation in this type of location could be UNSAFE, will most likely
damage the fan and its finish and will void your warranty
• Every effort has been made to provide you with proper instructions for the safe installation of
this ceiling fan. You could however, encounter situations or problems not covered in this
manual. Should this occur, please refer to a do-it-yourself wirings handbook or hire a qualified
electrician to install your fan.
• Never attach the blades to your ceiling fan before the fan body is properly mounted on the
ceiling.
• Lubrication of your new ceiling fan is not necessary. The ball bearings have been adequately
charged with grease and permanently sealed at the factory so that, under normal conditions
further attention is not necessary.
• To reduce the risk of fire, electrical shock, or personal injury, mount this fan to an outlet box
marked "Acceptable for Fan Support of 15.9 KG (35lbs)" or less and use Mounting Screws pro-
vided with the outlet box.
CAUTION: Install the primary mounting means and use only the hardware provided with the
fan.
• To reduce the risk of personal injury take care not to bend the blade brackets when installing
the brackets,balancing the blades or clearing the fan. Be careful not to insert foreign objects in
be tween rotating fan blades.
• To reduce the risk of fire or electrical shock, do not use this fan with any solid-state speed
control device.