Before using or storing the product, please use the charger to charge the product. When charging, the
indicator light is blue. The LED screen will display the current charging ratio and charging power. When the
LED screen shows 100% power, it means full charge. The charging process is about 2 hours. The current
power can be viewed through the LED screen.
CHARGING MODE
PRECAUTIONS FOR USE
1.
⑦
Press the button, the screen lights up, about 60 seconds after the screen backlight automatically closed.
2. When
②④⑧⑨
the button is pressed, the output port is turned on to power the device.
3.When the power output port is not used, press the 2,4,8,9 button to turn it off to save power.
4. Low temperature may affect the battery capacity of the product, the product can be charged in the
temperature range of 0 ~ 40 °C, in the temperature range of-10 ~ 40°C for equipment use.
5. The first use of the product is recommended to be fully charged, to avoid the lack of power to your use of
inconvenience. After the device is fully charged, the fan will continue to work for about 2 minutes after the
charging power cord is unplugged, which is used for cooling the device (the specific time may vary with the
scene temperature) , pay attention to prevent dust particles or foreign matter from being inhaled into the
equipment, otherwise it will easily lead to internal equipment damage.
6. After the discharge is terminated, the device fan will continue to work to reduce the device temperature to a
reasonable temperature for about 30 minutes (the time may vary with the scene temperature) . At the same
time charge and discharge, current more than 15A or equipment temperature is too high, will trigger automatic
power-off protection.
7. During the charging and discharging process, please connect the device with the charging and discharging
device, then turn on the charging and discharging. Otherwise, there might be a spark.
Standard charger,
about 2 hours
(the charging time is determined by the intensity of sunlight).
Support solar photovoltaic panel MPPT function charging (12-60V)
The above data are from the laboratory. The test data may vary due to the use environment, use method and
other factors, and the charging time will be different.
Car charger
about 2 hours
700W solar photovoltaic panel,
about 5 hours.
10
QC3.0 Output
11
Auxiliary Charge Output
3
5V/2.4A Quick Charge
2
AC Switch
4
Wireless charging Switch
7
Power Switch (click on start,
press 3 seconds to shut down)
9
USB Output Switch
8
DC Switch
5
15W - Wireless charging
6
Rollable wheels
1
LCD Screen
16
AC fast charging
14
DC charging
It can be charged by solar energy
15
16
Safety Switch
18
Telescoping handle
19
Portable Handle
17
230V output
12
Cooling outlet
13
Wire control interface
20
Cushion Foot Pad
21
PD65W-Output