The LED Rechargeable Floodlight’s portable bracket (3)
is adjustable (Max. 45°). Adjust the bracket to the suitable
position before using.
NOTE:
Do not exceed the adjustable stands range as will
lead to damaging the bracket
The USB DC 5V 1A output socket (8) can use for all
kinds of device which can be charged by USB cord (b),
such as mobile phone, MP3/MP4, Bluetooth headset
etc. (Refer to Fig. 2)
NOTE:
The USB output will stop output automatically if
the total working current of the total connected device
exceed the limit.
1. Open the protective cover (4) and push the micro plug (a)
into micro socket (6).(Refer to Fig. 2)
2. Plug the adapter into a suitable mains outlet. Do not use an
extension cord.
3. When the battery is loaded, three LED indicators (7) all
illumine (Red light, yellow light and green light light up in
sequence). (Refer to Fig. 2)
NOTE:
Close the protective cover after full charge which to
avoid water enter. (Refer to Fig. 2)
NOTE:
The LED indicator only will show red that means it’s bat-
teries will soon run out and need to recharge.
NOTE:
Don’t turn the Rechargeable Floodlight on/ use USB
while charging.
BRACKET ADJUSTMENT
OPERATION
Charging the Rechargeable
USB Output
FIG. 4
FIG. 5
SWITCH ON/OFF AND LUMEN ADJUSTMENT (See Fig. 2)
The Rechargeable Floodlight is equipped with an ON/OFF switch with mode function (8) locate
on the back side of the Rechargeable Floodlight.
The LED Rechargeable Floodlight’s brightness is adjustable.
With press ON/OFF switch (8): 1st press: 100% brightness; 2nd press: 50% brightness; 3rd press:
SOos flashing; 4th press: OFF.
Discharging time:
About 3 hours for 100% brightness;
About 5 hours for 40% brightness;
