meters.
9. Please use proper and safe wires to connect the lamps.
10. Please operate after familiarizing with the function of the lamp. Most of the damage to the
lamps is caused by improper operation, so non-professionals are not allowed to operate the
lamps. Do not shake the lamp at will, and do not operate it roughly.
11. Please do not modify the lamp at will. Doing so may cause short circuit, burning, electric
shock, etc., and cause malfunction and damage of the lamp. The manufacturer does not provide
warranty
1
,要由专业人员进行电源连接。
2
、确认使用电压不要高于或低于使用说明手册的规定值。
3
、确认电源线没有被利刃划破或损坏。
4
、灯具在不用时或在清洁前一定要断开电源。
5
、只允许用插头连接电源线,在拔插头时请不要用力拽电源线来拔出插头
6
、在安装灯具的过程中要小心操作,避免触摸裸露的电线,否则会遭受致命电击。
7
、灯具在使用时请不要直视光源,否则眼睛会受到伤害。
8
、在选择安装位置时,请确保灯具不被暴露在极热、潮湿或灰尘的地方。灯具和被照射物
体之间距离必须超过
0.5
米。确保在
0.5
米距离内没有易燃易爆物品。
9
、请使用适当的、安全的电线连接灯具。
10
、请在熟悉了灯具的功能后再进行操作。灯具的损坏大多数是由于不正当操作引起的,因
此不允许非专业人员操作灯具。使用时不要随意摇晃灯具,不可粗暴操作。
11
、请不要随意修改灯具,这样做可能会导致灯具出现短路、燃烧、电击等现象,而且因此
而造成灯具的故障和损坏,生产厂家不予保修。
Please pay attention to the following points when testing this product:
1. All screws and parts for installing the product must be tightly connected.
2. The housing, lens, fixing parts and installation location (such as ceiling,
hanger, truss, etc.) cannot be deformed
3. The moving parts of the machinery must not be worn out and cannot rotate
unbalanced.
4. The power cord should not have any damage, broken skin or scars, etc.
5. The installation and use of the product must be carried out by trained
professional and technical personnel, and safety hazards must be eliminated.
Note: Please unplug the power cord before doing product
maintenance! ! !
注意:请在做产品保养前把电源线拔掉!!!
In order to keep the product in good condition and prolong its service life, we
recommend regular cleaning of the product. The number of cleaning depends
on the operating frequency of the lamp and the surrounding environment:
1. Regularly clean the outer lens and inner lens of the product to prevent the
light output of the product from being weakened due to the dust on the lens.