bracket using a M10 screw fitted through the center hole of the “ bracket”. As an
added safety measure be sure to attached at least one properly rated safety
cable to the fixture using on of the safety cable rigging point integrated in the
base assembly
灯具安装：该设备提供了一个独特的安装支架组件，该组件将底座的底
部，随附的
“
支架
”
和安全缆索安装点集成在一个单元中（请参见下图）。
当将此固定装置安装到桁架上时，请确保使用适当的额定夹钳，使用穿
过
“
吊架
”
中心孔的
M10
螺丝将其固定在随附的托架上。 作为一项附加
的安全措施，请确保使用集成在基础组件中的一个安全缆索固定点将至
少一根适当额定的安全缆索连接到固定装置。
5. DMX-512 control connections
Connect the provided XLR cable to the female 3-pin XLR output of your
controller and the other side to the male 3-pin XLR input of the moving head.
You can chain multiple
Moving heads be connected together through serial linking. The cable needed
Summary of Contents for 3715
Page 28: ......
