INSTRUCTIONS MANUAL
Screw the clearomizer onto the battery.
- Unscrew section A from section B
- Fill section B with liquid down the side avoiding the
middle hole
- Fill up to the top measurement line
- Screw the sections back together
Clearomizers/coils should be changed each month.
- Click the button 5 times to turn the battery on/off
- Press and hold the button while inhaling
- Unscrew the battery from the clearomizer
- Screw the battery into the USB charger
- Plug the USB charger into any laptop/computer,
or use the wall
- plug provided and connect to a power outlet
- Charge the battery until the indication light on the
USB charger turns green, full charge will take
approximately 2-3 hours
- Do not charge the battery overnight
To maintain a healthy battery life, always fully charge
before use and do not store in a hot or humid
environment. Do not drop or force the battery and
keep it away from sharp objects.
To fill the clearomizer with e-liquid
Turning the battery on/off &
using the device
Charging the battery
E-Liquid
- To avoid a buildup of excess liquid in the mouthpiece, clean the overflow
prevention cap and the vapor pathway frequently to prevent blockage.
- Clean excess liquid from around the refill hole before use and if the
liquid touches your lips, wipe area immediately or wash with water.
Do not drink the liquid and use only as instructed.
- Keep liquids in a safe place away from children or pets and do not
store in a hot place or in direct sunlight.
- To prevent freezing, do not store in a cold place, improper storage
will cause the e-liquid to spoil or lose flavor.
Section A
Section B