RESISTANCE ADJUSTMENT
To ensure smooth efficient cycling action, the tension belt braking
system on your Exercise Cycle has been correctly adjusted by
our factory during production.
In accordance with BS EN 957,
the braking (resistance) system
on this cycle is speed
independent.
Note
There may be a small amount of
built in resistance present at first
due to the general tight fit of the
new bearings and bushes.
Note
When you have finished your routine, turn the Tension Control
(11) fully ANTI-CLOCKWISE again to ensure that the Tension Controller
Cable is not under tension when your Exercise Cycle is not in
use.
To adjust the pedalling resistance during use, start by turning the
Tension Control (11) fully ANTI-CLOCKWISE at the start of
your workout. Gradually increase the pedalling resistance by turning
the Tension Controller Knob CLOCKWISE as required.
Operating Adjustments
Page 13
The foot print for this product is
815mm x 375mm.
The Assembled Weight is 12 kg.
Note
47
815mm
375mm
11
