Assembly
2
Note
The highest position will
give the greatest intensity
during exercise.
Connect the REAR of the Main Frame (4) to the assembled Upright Support (3) using 1 x M10 x 60mm
Hex Bolt (20), 2 x M10 Flat Washers (25) and 1 x M10 Nylon Locknut (29) bolted from the SIDE.
Place an M8 x 90mm Carriage Bolt (19) in the UPPER hole on the rear of the Main Frame (4)and
through the hole in the Upright Support (3), secure in position using 1 x M8 Flat Washer (23),
1 x M8 Spring Washer (24) and 1 x M8 Locking Knob (Female) (28). Tighten securely to lock the
frame in position.
Fit the Front Stabiliser (5) to the Leg Extension Upright (6) and secure with 3 x M8 x 15mm Hex
Bolts (43) and 3 x M8 Flat Washers (23). Connect the assembled Leg Extension Upright to the
FRONT of the Main Frame (4) using 1 x M10 x 60mm Hex Bolt (20), 2 x M10 Flat Washers (25) and
1 x M10 Nylon Locknut (29) bolted from the SIDE. Place an M8 x 55mm Carriage Bolt (18) in the
UPPER hole on the front of the Main Frame (4) and through the hole in the Upright Support (3) using
1 x M8 Flat Washer (23), 1 x M8 Spring Washer (24) and 1 x M8 Locking Knob (Female) (28).
Tighten securely to lock the frame in position.
Fit the Leg Extension Support (7) into the Leg Extension Upright (6) to any one of 3 positions and
lock in position using the M8 Locking Knob (27).
Assemble the Leg Extension (8) to the Leg Extension Support (7) using 1 x M10 x 60mm Hex Bolt
(20), 2 x M10 Flat Washers (25) and 1 x M10 Nylon Locknut (29) bolted from the SIDE.
Fit the Leg Extension Weight Support (14) to the Leg
Extension (8) using 1 x M8 x 45mm Carriage Bolt (45),
1 x M8 Flat Washer (23) and 1 x M8 Nylon Locknut (26).
Tighten securely and slide on the Weight Retainer Clip (31).
Insert the Leg Extension Pad Bar (9) into the holes
of Leg Extension Support (7) and Leg Extension (8)
and then slide the Foam Roller (40) onto the Leg
Extension Pad Bar (9).
PART No. DESCRIPTION . . . . . . . . . . . . . . QTY
Assembly Accessories 2
18
M8 x 55mm CARRIAGE BOLT . . . . . . .
19
M8 x 90mm CARRIAGE BOLT . . . . . . .
20
M10 x 60mm HEX BOLT . . . . . . . . . .
23
M8 FLAT WASHER . . . . . . . . . . . . . .
24
M8 SPRING WASHER . . . . . . . . . . . .
25
M10 FLAT WASHER . . . . . . . . . . . . .
26
M8 NYLON LOCKNUT . . . . . . . . . . . .
27
M8 LOCKING KNOB (MALE) . . . . . . . .
28
M8 LOCKING KNOB (FEMALE) . . . . . .
29
M10 NYLON LOCKNUT . . . . . . . . . . .
31
WEIGHT PLATE RETAINER CLIP . . . . . .
1
3
1
3
2
1
1
6
2
6
3
1
1
M8 x 45mm CARRIAGE BOLT . . . . . . .
45
M8 x 15mm HEX BOLT . . . . . . . . . . . .
43
Page 16
