V.Bot M285DP, Operation Manual

Page: 14 / 28

Recharging Battery:
1. Before charging, please check if the battery is properly mounted and turn on the
power switch.
2. Two ways to charge the battery:
A. Push the adaptor plug into d.c. jack at the side of the unit first, and then plug the
a.c end of the adaptor into the a.c. power outlet on the wall. (Please connect the
adaptor to the unit first before connecting to the a.c power outlet.)
B. Make sure the docking station is installed properly, place the unit to the docking
station, make sure the contact points at the back of the unit lean on the contact
plates at the docking station.
※
Pressing on the bumper of the unit to the end, and then turn on the power
switch , to let the unit enter into the mode of searching the docking station
for auto recharge. (refer the illustration below)
12
INSTALLATION GUIDE
Adaptor plug
D.C. jack
Charging
Dust bin full
Battery low
＊
LED INDICATOR
30 c
m
10
0 c
m
24H
Full Go
Go
Turn on the switch.
Pressing on the bumper in the end.