NivoRadar
®
Continuous level measurement
Series NR 4100
Technical information / Instruction manual
Product description
page 7
medium and received by the antenna as an echo with modified
frequency. The frequency change is proportional to the distance and
is converted into the level.
Adjustment
Devices with integrated Bluetooth module can be adjusted wire-
lessly via smartphone/tablets (iOS or Android operating system).
1
2
Fig. 3: Wireless connection to standard operating devices with integrated
Bluetooth LE
1 Sensor
2 Smartphone/Tablet
Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a
test based on ISO 4180.
The packaging consists of environment-friendly, recyclable card-
board. For special versions, PE foam or PE foil is also used. Dispose
of the packaging material via specialised recycling companies.
Transport must be carried out in due consideration of the notes on
the transport packaging. Nonobservance of these instructions can
cause damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or
concealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only
under the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
Wireless adjustment
Packaging
Transport
Transport inspection
Storage
