14
Nivo®Guide 3100 • Two-wire 4 … 20 mA/HART
5 Set up with the display and adjustment module
61268-EN-190215
1
2
Fig. 11: Installing the display and adjustment module in the double chamber
housing
1 In the electronics compartment
2 In the connection compartment
Note:
¾ÑÇÍÁÆ̽ƼÌÇʽÌÊÇŲÌÌÀ½ÁÆËÌÊÍŽÆÌÏÁÌÀ¹¼ÁËÈĹѹƼ¹¼ÂÍËÌŽÆÌ
module for continuous measured value indication, a higher lid with an
inspection glass is required.
5.2 Parameter adjustment - Quick setup
To quickly and easily adapt the sensor to the application, select
the menu item "
Quick setup
" in the start graphic on the display and
adjustment module.
ÇÍ»¹ÆŲƼͷ
Extended adjustment
" in the detailed operating
instructions.
Measurement loop name
ÆÌÀ½ŲÊËÌŽÆÍÁ̽ÅÑÇÍ»¹Æ¹ËËÁ¿Æ¹ËÍÁ̹ºÄ½Å½¹ËÍʽŽÆÌÄÇÇÈ
ƹŽƖÇÍ»¹Æ½Æ̽ʹƹŽÏÁÌÀŹÐƖʾˆ»À¹Ê¹»Ì½ÊËƖ
Type of medium
ÆÌÀ½Æ½ÐÌŽÆÍÁ̽ÅÑÇÍ»¹Æ˽½ÏÀÁ»ÀÌÑȽǾŽ¼ÁÍÅÌÀ½ÁÆËÌÊÍ
-
ment is suitable for. If your instrument is only suitable for a certain
medium, this menu item is not visible.
Quick setup
General information
