13
Nivo®Guide 3100 • Two-wire 4 … 20 mA/HART
5 Set up with the display and adjustment module
61268-EN-190215
5 Set up with the display and adjustment
module
5.1 Insert display and adjustment module
The display and adjustment module can be inserted into the sensor
¹Æ¼Ê½ÅÇν¼¹¿¹Áƹ̹ÆÑÌÁŽƖÇÍ»¹Æ»ÀÇÇ˽¹ÆÑÇƽǾ¾ÇÍʼÁŰ½Ê
-
ent positions - each displaced by 90°. It is not necessary to interrupt
the power supply.
Proceed as follows:
1. Unscrew the housing lid
2. Place the display and adjustment module on the electronics in the
desired position and turn it to the right until it snaps in.
3. Screw housing lid with inspection window tightly back on
Disassembly is carried out in reverse order.
The display and adjustment module is powered by the sensor, an ad-
ditional connection is not necessary.
Fig. 10: Installing the display and adjustment module in the electronics compart-
ment of the single chamber housing
