UWT Capanivo CN 4000 Series Technical Information/Instruction Manual Download Page 1

Page: 1 / 21

Level limit switch

Series CN 4000

Technical Information / Instruction manual

page

Table of contents

Page

Safety

notes/

Technical

support

-----------------------------------------------------------------------------------------------------

Introduction

-----------------------------------------------------------------------------------------------------

Technical

data

-----------------------------------------------------------------------------------------------------

Approvals 9

-----------------------------------------------------------------------------------------------------

Options/

accessories

-----------------------------------------------------------------------------------------------------

Mounting 11

-----------------------------------------------------------------------------------------------------

Electrical

installation

-----------------------------------------------------------------------------------------------------

Settings

-----------------------------------------------------------------------------------------------------

Signal

output

logic 18

-----------------------------------------------------------------------------------------------------

Maintenance

-----------------------------------------------------------------------------------------------------

Notes for use in Hazardous Locations

-----------------------------------------------------------------------------------------------------

Disposal

Subject to technical change.

We assume no liability for typing errors.

All dimensions in mm (inch).

Different variations than specified are possible.

Please contact our technical consultants.

Capanivo

CN 4000

gi011217

Summary of Contents for Capanivo CN 4000 Series






















Search results

Summary of Contents for Capanivo CN 4000 Series

Reviews:

Related manuals for Capanivo CN 4000 Series

Brands by name

Popular brands

UWT Capanivo CN 4000 Series, Technical Information/Instruction Manual

Search results

Summary of Contents for Capanivo CN 4000 Series

Reviews:

Related manuals for Capanivo CN 4000 Series

Brands by name

Popular brands