UWE CCS Series, Operation Manual

Page: 4 / 50

3
10. Prevent jolts, torsion and oscillation (e.g.
by sloping appending) of all kinds. Be sure
to prevent overloading the scales in excess
of the stated maximum load, minus any tare
weight that may possible exist. This could
damage the scale (risk of breakage). Do not
use the crane scale to transport loads (e.g.
traveling crane).
11. Never operate the scale in hazardous
locations. The series design is not
explosion-proof.
12. Structural alterations may not be made to
the scale. This can lead to incorrect
weighing results, faults concerning safety
regulations as well as to destruction of
the scale.
13. Avoid sudden and jerky acceleration or
deceleration of the load (risk of breakage).