Symptom
Indicator displays
-----
Check
Is the load cell signal cable connected to
the indicator properly?
Action
Recheck signal cable connections.
Check
Is load cell working properly?
Action
Check load cell input/output.
Symptom
Display shows 00000 after counting down
Check
Is the load applied to platter above the
rated capacity of the scale?
Action
Remove all loads from platter and try again.
Symptom
Weighing result is not accurate
Check
Is the scale placed on a level surface?
Action
Install the scale on a level surface.
Check
Is the scale affected by airflow, vibration
or RFI?
Action:
Position the scale away from all
disturbances.
Check
Is the indicator calibrated correctly?
Action
Contact your dealer.
7. DAILY CARE AND MAINTENANCE
7.1
Clean the indicator with a soft and damp cloth.
If necessary, apply a mild detergent.
7.2
Do not use any harsh, abrasive material, acetone,
volatile solvent, thinner or alcohol for
cleaning.
7.3
Verify the accuracy of indicator periodically.
Re-calibrate the indicator if necessary by
contacting your scale dealer.
7.4
Store indicator scale in a dry and clean place.
