15
English
Assembling the optional cape(top):
1) Secure the top cap with the rst leash around the
shoulder strap
2) Repeat on the other side
Assembling the optional cap (bottom):
1) Thread the lower strap of the top cap through the loop
on the back of the wing
2) Secure the top cap lower strap with the Velcro on it´s
inside
Assembling the optional cape (side):
1) Attach the small plastic clip to the bungee that holds
your wing on the harness
12. AFTER THE DIVE
Cleaning the BC, Check, Storage and Transport:
Correct servicing and maintenance guarantees you many years reliable function of your SCUBAPRO
®
X-TEK BC.
Keep the following instructions for care:
• Fill the bladder with fresh water and shake so that the water reaches everywhere.
• Keep the bladder upside down and press the exhaust button on the in ator so that all the water can drain.
• Disinfect the inner bladder on a regular basis to prevent bacterial growth.
• Rinse the outer shell thoroughly with fresh water.
• Clean all valves so that possible dirt is removed.
• Place a small amount of silicone on the quick release collar for the power in ator attachement (SCUBAPRO
®
silicone
grease).
• Slightly in ate the bladder and hang it up for drying. Do not dry or store the bladder in direct sunlight.
• Dry store the BC slightly in ated in a cool dry place, protected from direct sunlight.
Inspection and Service Interval:
For your safety your BC should be inspected and maintained at an Authorized SCUBAPRO Service Center at least once
a year, more often if you dive frequently. Any damage caused due to failure to properly maintain the BC is not covered by
the warranty.
13. TRANSPORT OF THE X-TEK SYSTEMS:
Handle the XTEK systems in such a way to ensure that no sharp or heavy objects (e.g. knives, bottles, lamps, lead etc.)
damage the harness, bladder, or in ators.
9865 - Scubapro Manuale X-TEK SIDEMOUNT - totale.indb 15
10/12/2013 10:23:18
