14
Threading the bungees on the wing:
1) Thread the bungee through the loop on the top of the
wing’s back
2) Thread the bungee through the upper grommet of the
harness
3) Now attach the bolt snaps to the bungee using the
knot in pic. B
Attaching the wing to the harness with the lower screws:
1) Insert the screw through the lower attachment points
of the wing and thread through the small grommets on
the lower part of your harness. Fix the screw with the
washer and the nut on the inside of the harness
Attaching the wing to the harness with the upper screw:
1) Insert the female screw through the second grommet
on the top of the harness’s inside
2) If optional weight attachment strap is used, please
attach it between wing and harness. Then secure with
the male screw and tighten rmly
9865 - Scubapro Manuale X-TEK SIDEMOUNT - totale.indb 14
10/12/2013 10:23:14
