SCUBAPRO MK 18 First Stage
2003 SCUBAPRO
Important note
: The following information is not designed to be a complete training guide for servicing the listed SCUBAPRO regulators. All SCUBAPRO
technicians are required to attend an annual service training program to insure safe handling and servicing of SCUBAPRO products. All SCUBAPRO technicians
must be employed by an authorized SCUBAPRO facility.
8
6 mm
For DIN Regulators
Remove the DIN Fitting from the
regulator body.
Christo-Lube
OXYGEN COMPATIBLE LUBRICANT
P/N 41-047-000
Using a brass o’ring pick, remove the
star retainer and filter.
Clean and inspect all regulator parts.
Replace the conical filter. Inspect and
lubricate the static yoke nut o’ring.
Replace the o’ring if needed.
