26
3. Meridian as a dive computer
SCUBAPRO MERIDIAN
3. Meridian as a dive computer
By pressing SEL/ESC button the function
starts to flash and you may select On or Off
by pressing the +/UP or –/DOWN button.
The selection is confirmed by pressing
SEL/ESC button.
Alarm depth
Status
3.3.2
Maximum dive time alarm
By pressing SEL/ESC button in this menu
the time value starts to flash. By pressing
the +/UP or –/DOWN button the value can
be selected between 5 and 195 minutes
in 1 minute increments. By pressing SEL/
ESC button the function starts to flash and
you may select On or Off by pressing the
+/UP or –/DOWN button. The selection is
confirmed by pressing SEL/ESC button.
Alarm time
Status
3.3.3
Setting the Micro Bubble
level
By pressing SEL/ESC button in this menu
the Micro Bubble level starts to flash. By
pressing the +/UP or –/DOWN button you
may select personal settings from L0 up to
L5. L5 is the most conservative setting. The
selection is confirmed by pressing SEL/
ESC button.
Micro Bubble level
F
NOTE: more about diving with the MB
levels, read chapter:
Diving with MB
levels
.
3.3.4
Setting the Safety stop timer
Meridian safety stop timer starts
automatically when the depth at the end
of the dive becomes less than 5m/15ft and
all decompression or MB stops have been
accomplished.
By pressing SEL/ESC button at this menu
the number at the bottom row will start
flashing. By pressing the +/UP or –/DOWN
button the value can be set between 1 to 5
minutes or to Off.
Duration of the safety stop
3.3.5
Setting the user preferred
units
The user may select between depth and
temperature unit combinations. The effect
Summary of Contents for Meridian
Page 1: ... Meridian ...
