2. Meridian as a watch
2. Meridian as a watch
13
English
SCUBAPRO MERIDIAN
2.1.4
Set the 12/24h mode
24 hour display
By pressing the SEL/ESC button at the
mode menu 24h starts flashing. With +/
UP or –/DOWN buttons you may change
between 24 hour or 12 hour format = am/
pm displays. Pressing SEL/ESC will save
the selection.
F
NOTE: the 12 hour selection will
change the shown day format to
display date in the following sequence:
Month.Date.Year. If you keep the
watch in the 24 hour format, you
will have the date displayed in the
following sequence: Date.Month.Year
This change also takes place in the
watch and in the dive computer log
book.
2.1.5
Setting the date
When setting the date, by pressing the
SEL/ESC button, the first digits will flash,
indicating they can be changed by pressing
+/UP or –/DOWN buttons (in 24h mode the
first digit is days, in 12h mode the first digit
is the month). By pressing the SEL/ESC
button the setting will be saved and move
to the next digits. Again by pressing the
SEL/ESC button the year digits after the
dot will start flashing.
2.1.6
Setting the sound to “off ”
(silent mode)
By pressing the SEL/ESC button the ‘on’
setting will start flashing at the bottom of
the display. By pr/UP or –/DOWN
buttons you may select ‘on’ or ‘off’ for the
Meridian silent mode for alarms and button
tones. The sound off selection is protected
with a code.
Warning
The Sound ‘off’ selection will disable all
audible dive mode alarms and warnings. This
is potentially dangerous.
F
NOTE:
the only exception to the
silent operation is the alarm clock. It
will remain activated even if the main
setting is: sound off.
To turn off the sound a code must be
entered into the dive computer to activate
the change. The unlock code for ‘sound
off’ is 313. When the sound off option has
been selected the first digit starts flashing.
By pressing +/UP or –/DOWN buttons
the code number can be changed and by
pressing the SEL/ESC button the code
number will be stored.
Summary of Contents for Meridian
Page 1: ... Meridian ...
