10
M2 USER MANUAL
3.1.1
Setting the alarm clock
(“ALARM”)
By pressing the SEL button the alarm
status will start blinking and can be
switched to either on or off by pressing the
+/UP or -/DOWN buttons. By pressing the
SEL button the hours of the alarm will start
blinking. You can scroll the hours setting
by pressing the +/UP or -/DOWN buttons.
By pressing the SEL button the minutes
will start blinking and by pressing the +/UP
or -/DOWN buttons you can scroll them.
Pressing the SEL button will confirm the
settings.
F
NOTE: The ‘sound off’ setting does not
affect the alarm clock. However, the
intelligent battery stretching algorithm
disables all warning tones when there
are less than 2 dots left in the battery
status display or when the battery
symbol is blinking in other displays
.
3.1.2
Setting the UTC (“UTC 1”)
The UTC setting will change the shown
time compared to Greenwich 0-Meridian.
This feature is practical when travelling
through different time zones.
By pressing SEL the hours will start
blinking. You may edit them with the +/UP
or -/DOWN buttons in a range of +14h..-
13h. By pressing SEL the minutes will start
blinking and you may edit them with the
+/UP or -/DOWN buttons in 15-minute
increments. The UTC setting will be
confirmed by pressing the SEL button.
3.1.3
Setting the time (“TIME”)
In the display above the current time is
shown on the display.
By pressing the SEL button the time setting
will be activated: hours start blinking and
seconds turn to 00. You may change the
hours with the +/UP or -/DOWN buttons.
By pressing the SEL button the selection
will change to minutes and can be edited.
The new time setting will be confirmed by
pressing the SEL button.
F
NOTE: Seconds cannot be edited;
they always start counting from 0.
Summary of Contents for M2
Page 1: ... M2 User Manual ...
